Table of Contents
Advertisement
Installation
Levelling the machine
The machine must stand perfectly level
on all four feet to ensure safe and
proper operation.
Incorrect installation may increase elec-
tricity and water consumption and may
cause the machine to move about.
The four adjustable screw feet are used
to level the machine. All four feet are
screwed in when the machine is deliv-
ered.
Screwing out and adjusting the feet
^ Gently tip the machine and prop it up
using a solid wood wedge for exam-
ple, to ensure stability.
,
Make sure the machine does not
slip as this could cause injury.
54
^ With a screwdriver loosen and turn
the foot 1 together with the
counternut 2 to the left, (see illustra-
tion below) and screw out.
^ Put the machine back on all four feet.
^ Use a spirit level to check the ma-
chine is standing level.
^ Hold the foot 1 firm using a pipe
wrench and turn the counternut 2 to
the right firmly up against the housing
with a screwdriver.
,
All four counternuts must be
firmly up against the housing. Please
also check this for the feet which did
not need adjustment. Otherwise
there is the danger of the machine
moving about.
Hide quick links:
Advertisement
Table of Contents
