Table of Contents
Advertisement
3. Starting the calibration
programme
For optimum water and energy
consumption and excellent wash
results, it is important to calibrate the
washing machine.
To do this, the Cottons programme
must be run without laundry and
without detergent.
Turn on the tap.
Turn the programme selector to the
Cottons position.
The washing machine is now switched
on and the temperature 40 and spin
speed 1400 light up.
Touch the Start/Add laundry sensor.
The programme will start.
After 10 minutes, the indicators will
dim.
Opening the door at the end of the
programme
The door remains locked during the
Anti-crease phase. The control panel
lights up for 10 minutes after the
programme ends. The control panel
then goes out and the Start/Add
laundry sensor flashes.
Before using for the first time
Turn the programme selector to the
position.
appears in the time display and
the indicator light goes out.
The door will unlock.
Useful tip: After the Anti-crease phase,
the washing machine will have switched
off and the door unlocked
automatically. The control panel is
completely dark.
Take hold of the door and pull it
open.
Useful tip: For safety reasons, close the
door when the washing machine is not
in use. Otherwise there is a danger of
objects being placed inadvertently in
the drum. If these remain unnoticed and
were washed in the next load, they
could damage the laundry. An open
door is also a danger to pets and
children.
The appliance is now ready for use.
19
Advertisement
Table of Contents
