Using the gas hob
Before first use
IMPORTANT: You should clean the hob surface (see
"Cleaning and maintenance" section).
Switching the hob on
The following symbols will appear on the control panel, next to each
control knob:
0 = gas off
Large flame: maximum setting
Small flame: minimum setting
o The minimum setting is at the end of the anti-clockwise rotation
of the control knob.
o All operation positions must be selected between the maximum
and minimum position.
o Never select a knob position between the maximum and off
position.
o The symbol on the control panel, next to the control knob will
indicate which gas burner it operates.
Push button ignition with flame failure safety device
(BG60TCBL/SS/W)
The appliance is fitted with a flame failure safety device on each
burner, which is designed to stop the flow of gas to the burner head in
the event of the flame going out.
o Press in and turn the appropriate control knob anti-clockwise to
the large flame symbol.
o Whilst pressing in the control knob, press and hold down the
ignition button, which is located on the control panel.
o You should hold down the ignition button for 20 seconds after
the flame on the burner has lit.
13