In Case Of Difficulty - AT&T Four-Line Intercom Speakerphone 974 User Manual

974_CIB_1ATT_033104

IN CASE OF DIFFICULTY

If you have difficulty operating this phone, try the suggestions below.
For Customer Service, visit our website at
1 800 222–3111
or call
underside of your phone, available when contacting Customer
Service. Please retain your receipt as your proof of purchase.
To purchase accessories or replacement parts contact Customer Service.
Visit our website at
1 800 222–3111.
TELEPHONE OPERATION
PROBLEM
Telephone Does Not
Work Properly
PROBLEM
No Dial Tone
PROBLEM
Telephone Does
Not Ring
88
3/31/2004 5:28 PM Page 88
. Have the serial number, found on the
www.telephones.att.com
SOLUTION
• This 974 telephone is not compatible with
any 843, 853, 854, 874, or 954 telephones
you may have previously installed.
SOLUTION
• Make sure all plugs are connected properly.
Inspect the line cord connections at the
modular jack(s) and at the telephone.
Also inspect the coiled handset cord
connection at both ends.
• Make sure a line is selected.
• Make sure Hold is not activated.
• If you do not hear a dial tone when you
press h, make sure the headset is
firmly connected at the jack.
SOLUTION
• Make sure the Do Not Disturb (DND)
feature is not activated.
• Make sure the ringers are turned on.
• If there are several non-system phones
on the line that doesn't ring, disconnect
some of them. Having too many phones
connected can also result in low ringer
volume for non-system telephones.
• If the INTERCOM light flashes but you
don't hear a paging signal, make sure the
Do Not Disturb feature is not activated.
www.telephones.att.com
or call