Form B1: System Extensions - Lucent Technologies PARTNER Advanced Communications System Release 1.0 System Planner Manual

Ext.
Jack
No. Write Name/Description
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
IMPORTANT: A system display phone is required for programming at extension 10 or 11. Extension 10 typically is the receptionist's extension.
Extension 11 is recommended as a second programming extension (typically the System Manager's extension).
1. If checked, see Form B1, Page 3 of 3.
2. If there is a mix of PARTNER-model and MLS-model phones, write "P" for PARTNER and "M" for MLS.
3. Write "T" for touch-tone or "R" for rotary. If Call Waiting is desired, check next column.
4. Must be standard phone. If immediate dialing is required, use a dedicated line. Do not assign restrictions that
prevent dialing the outside number, Forced Account Code Entry {#307}, or groups. Also see Form D, External
Hotline {#311}.
5. Standard phone is recommended. Write extension number of corresponding alert extension or "70" for loud-
speaker paging system in next column.
Identify Telephone
Attached to this Extension
6. Also write Transfer Return Ext. No. {#306} on this form (usually extension 10). Also see Form B2, Identify
7. To prevent other extensions from interrupting calls, assign Automatic Extension Privacy {#304} on Form B2.
8. Check corresponding alert extensions in next column. To prevent outside calls, remove all outside lines—see
9. Also write Transfer Return Ext. No. {#306} on this form.
10. Write "1," "2," or "B" (for Both) to identify which Contact Closure the extension can activate.

Form B1: System Extensions

Required for PARTNER Advanced Communications System.
For additional instructions, see page 5.
Identify Auxiliary Equipment
Attached to this Extension
Group Assignments, VMS Only.
Lines Not Assigned on Form B2.
PAGE
1 of 3
Write
Transfer
Write in Return
Other Ext. No.
Equipment {#306}