Telnetting To The Proxy Agent - Lucent Technologies OneVision DEFINITY G3 Fault Management Installation And Integration Manual

Integration for ibm netview on aix

Hide thumbs Also See for OneVision DEFINITY G3 Fault Management:

Table of Contents

Telnetting to the Proxy Agent

To telnet to the Proxy Agent from your NMS:

1. From the main map, select the Proxy Agent icon.

2. Do one of the following:

— Double click the Proxy Agent icon.

— On the Monitor menu, select DEFINITY, then select Telnet to

G3 Proxy Agent...

The system opens a telnet window similar to the one shown below..

3. Log into the Proxy Agent. You must have a valid Proxy Agent user login

ID and password. When you have logged in correctly, the system

prompts you for the term type.

4. Enter the term type. For example: vt100.

5. Enter n at the following prompt:

Display Desktop y/n?

Issue 1 August 1996

Table of Contents

Do you have a question about the OneVision DEFINITY G3 Fault Management and is the answer not in the manual?