Installation And Setup Task List - Lucent Technologies OneVision DEFINITY G3 Fault Management Installation And Integration Manual

Installation and Setup Task List

Legend:
1. DEFINITY G3
2. System access ports
3. DEFINITY G3 Proxy Agent
4. TCP/IP
5. Internet/LAN/WAN
6. X-terminal
7. NMS
Operating system = AIX
NMS platform
DEFINITY G3 Fault Management
Installation and Setup Task List
This section provides a list of tasks, in the recommended order, to perform
while installing and setting up Fault Management. Use this list to check off
your installation activities as you complete them. You may want to make
your own task list based on this one, and include persons or organizations
responsible and dates to be completed.
NOTE:
These procedures assume that installation of Management
Solutions DEFINITY G3 Proxy Agent has occurred or will occur
shortly. You can install Fault Management without the Proxy Agent
being installed, but without the Proxy Agent up and running
properly and until the full connectivity is established, the NMS will
not receive any PBX data. Furthermore, communication between
the Proxy Agent and Fault Management requires correlation
between values in specific fields on the Proxy Agent and NMS
administration. Therefore, you should plan some coordination for
installing these two applications.
Issue 1 August 1996
5