States Of The Proxy Agent Icons; Icon States - Lucent Technologies OneVision DEFINITY G3 Fault Management Installation And Integration Manual

Integration for ibm netview on aix
Hide thumbs Also See for OneVision DEFINITY G3 Fault Management:
Table of Contents

Advertisement

Alarm States
The NMS polls the Proxy Agent for the sysDescr object to determine if
the Proxy Agent is running. If the NMS receives a response that the
object does not exist or if the Proxy Agent does not respond, the icon's
state is set to Unknown. The default polling interval for the sysDescr
object is five minutes.
The NMS polls the Proxy Agent for the g3connectState object. If the
value is not "up," then the icon's state is set to Unknown. The default
polling interval is five minutes.

States of the Proxy Agent Icons

Each state of the Proxy Agent icon represents one of the possible conditions that can
exist between the Proxy Agent and the PBX.

Icon States

The states or conditions for Proxy Agent icons are as follows:
State
Normal
User1
User2
Critical
32
Issue 1 August 1996
Definition
The Proxy Agent is communicating with the NMS
and that the G3 Peer process is registered with
the SMUX agent process.
The Proxy Agent is communicating with the NMS
and that the NMS has received an authentication
failure Trap sent by the Proxy Agent.
There is a communication problem between the
NMS and the Proxy Agent.
The Proxy Agent has failed to forward alarms to
its administered destination.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OneVision DEFINITY G3 Fault Management and is the answer not in the manual?

Questions and answers

Table of Contents