Lucent Technologies OneVision DEFINITY G3 Fault Management Installation And Integration Manual page 29

Adding DEFINITY G3 PBX Nodes
3. Enter the following information:
Field
Proxy
Target
Community
Set Community
4. Complete the other fields as normal. We suggest you use the following
values:
Field
Timeout
Retry
Port
Polling
The name or IP address of the Proxy Agent with
which the PBX will be communicating
The object's name.
The name you enter in this field must match the
name in the Selection Name field in step 9 of
the previous procedure, Adding PBX Icons.
These names must be spelled and capitalized
exactly the same.
The community name in the following format:
<public>!g3mgt!<client string>
The community string (public) must
match the name in the Community String
field on the Proxy Agent's Managers form.
Do not change !g3mgt!
The "client string" must be the same as the
client string on the Proxy Agent's Clients
form.
Usually the same value as the Community.
What you enter
0.8
3
(leave blank)
5m
Issue 1 August 1996
17