How To Telnet To The Proxy Agent - Lucent Technologies OneVision DEFINITY G3 Fault Management Integration Manual

Optivity enterprise, integration for hp openview on hp 9000 and sun os

Hide thumbs Also See for OneVision DEFINITY G3 Fault Management:

Table of Contents

OneVision Icons

How to Telnet to the Proxy Agent

From

See Appendix B in your Fault Management installation guide.

OpenView

From the

Start at the Enterprise Command Center.

ECC screen

Step

Action

Select a Proxy Agent icon from the Contents panel.

Drag your selection to the Config icon in the Tools panel.

Result: The system opens a telnet window.

Log into the Proxy Agent and complete the telnet prompts.

Hint: If you need help, see

Management installation guide

Appendix B in your Fault

Issue 1 November 1996

Table of Contents

Do you have a question about the OneVision DEFINITY G3 Fault Management and is the answer not in the manual?