Troubleshooting Tips - Lucent Technologies OneVision DEFINITY G3 Fault Management Integration Manual

Autodiscovery

Troubleshooting Tips

Troubleshooting Tips
Events Log The Application Alert event log is an OpenView feature that lists
autodiscovery's activities.
When to use Use this events log for trouble shooting problems that may occur
when you activate autodiscovery manually.
Status The events log may contain any of the following status messages
messages for autodiscovery:
Message
Auto-Discovery requested by
user
Auto-Discovery currently in
progress, current request
ignored
Read Only Map -
Auto-Discovery Terminated
Auto-Discovery not available
with this configuration
Error Encountered -
Auto-Discovery Terminated
Auto-Discovery Completed
Successfully
See also See your OpenView documentation for more information about
this events log.
30 Issue 1 November 1996
Description
You activated autodiscovery
manually.
Autodiscovery is currently running.
The request to activate is denied.
You tried to activate autodiscovery
from a read-only map.
You tried to run autodiscovery
without the integration package.
Autodiscovery started, but stopped
when it found an error.
Autodiscovery completed your
request with no errors.