Network Environment - Lucent Technologies OneVision DEFINITY G3 Fault Management Integration Manual

Optivity enterprise, integration for hp openview on hp 9000 and sun os

Hide thumbs Also See for OneVision DEFINITY G3 Fault Management:

Table of Contents

System Overview

Network Environment

Introduction

Before you install the integration software, make sure that your

network environment is correctly set up.

Required

Lucent Technologies does not explicitly certify any hardware, but

hardware

does support Fault Management and the Proxy Agent on any Sun

Sparc hardware that is certified for HP OpenView.

This hardware must include RAM memory, as follows:

Required

software

Issue 1 November 1996

For the first user, 96 Mbytes

For each additional user, 32 Mbytes

Hewlett Packard OpenView and Network Node Manager,

release 3.31

One of the following operating systems:

— SunOS 4.1.3

— HP-UX 9.05

OneVision DEFINITY G3 Fault Management, release 1.2.1

OneVision DEFINITY G3 Proxy Agent, release 1.2.1

Optivity Enterprise, release 7.1

Table of Contents

Do you have a question about the OneVision DEFINITY G3 Fault Management and is the answer not in the manual?