What To Install First - Lucent Technologies OneVision DEFINITY G3 Fault Management Integration Manual

Installation

What to Install First

What to Install First
Introduction Before you install the integration software, install all the required
software listed on page 8.
Installation Install your software in the following sequence:
sequence
Step
1
2
3
To install See your OneVision documentation for the installation procedures.
OneVision These documents are listed on page vi.
software
10 Issue 1 November 1996
Software
Your network software: your operating system and HP
OpenView
Your applications: OneVision (Proxy Agent and Fault
Management) and Optivity
Note: You can install OneVision and Optivity in any
sequence. However we recommend that you install the
OneVision software in the following order:
a. Proxy Agent
b. Fault Management
Your integration software