Troubleshooting Tips - Lucent Technologies OneVision DEFINITY G3 Fault Management Integration Manual

Installation

Troubleshooting Tips

Troubleshooting Tips
Introduction When you install the integration package, you may see the
following error messages.
Message 1
Optivity Path environment variable (LNMSHOME) not
set up.
Cause:
Solution:
Message 2
Optivity Configuration Directory (path) not
found.
Cause:
Solution:
Messages 3
Optivity ECC Directory ($LNMSECC) not found.
Cause:
Solution:
12 Issue 1 November 1996
The Optivity environment is not set correctly.
Make sure that Optivity has been installed. If it was,
either of the following actions may resolve the error.
Login as root, and then enter
Set the LNMSHOME variable to the Optivity base
directory. The default is /usr/lnms.
The home directory for Optivity does not contain a
configuration directory.
Install Optivity.
The home directory for Optivity does not contain a
registration directory.
Install Optivity.
.
LNMS_ENABLE