DFI LanParty 925X-T2 User Manual page 94

3
BIOS Setup
3.1.8.5 PCI-Express Frequency
Default
Fix100MHz
3.1.8.6 Multiplier Factor
This field is used to select the multiplier factor for the CPU.
3.1.8.7 Estimated New CPU Clock
This field will show the estimated new CPU clock.
3.1.8.8 N/B Strap CPU As
This field is used to select the external hardware reset strap for the
north bridge (MCH).
3.1.8.9 System Power Supply
Default Default setting.
Manual Select this option to manually configure the "CPU VID
3.1.8.10 CPU VID Voltage
This field allows you to manually adjust to a higher core voltage that
is supplied to the CPU. If you want to use the CPU's default core
voltage, leave this field in its default setting. The CPU's Vcore will be
generated according to the CPU VID configuration.
9 4
Default setting.
This option will set the PCI Express frequency to
100MHz.
Important:
The multiplier factor of some processors may have been locked
by the manufacturer. If you are using this kind of processor,
setting a multiplier factor for the processor will have no effect.
The system will instead use its factory default multiplier.
Voltage" to "NB 1.5V Voltage" fields.
Important:
Although this function is supported, we do not recommend that
you use a higher voltage because unstable current may be
supplied to the system board causing damage.