DFI LanParty 925X-T2 User Manual page 84

3
BIOS Setup
PCI Express PME
This options are Enabled and Disabled.
3.1.5.2 ACPI Function
This function should be enabled only in operating systems that sup-
port ACPI. Currently, only Windows
If you want to use the Suspend to RAM function, make sure this
field is enabled then select "S3(STR)" in the "ACPI Suspend Type"
field.
3.1.5.3 ACPI Suspend Type
This field is used to select the type of Suspend mode.
S1(POS)
S3(STR)
3.1.5.4 Run VGABIOS if S3 Resume
When this field is set to Auto, the system will initialize the VGA BIOS
when it wakes up from the S3 state. This can be configured only if
the "ACPI Suspend Type" field is set to "S3(STR)".
3.1.5.5 Power Management
This field allows you to select the type (or degree) of power saving
by changing the length of idle time that elapses before the Suspend
mode and HDD Power Down fields are activated.
Min Saving
Max Saving
User Define
8 4
Enables the Power On Suspend function.
Enables the Suspend to RAM function.
Minimum power saving time for the Suspend Mode
(1 hour) and HDD Power Down (15 min.)
Maximum power saving time for the. Suspend
Mode and HDD Power Down = 1 min.
Allows you to set the power saving time in the
"Suspend Mode" and "HDD Power Down" fields.
® ® ® ® ®
2000/XP supports this function.