DFI LanParty 925X-T2 User Manual page 87

3.1.5.16 Resume By Alarm
Enabled When Enabled, you can set the date and time you
would like the Soft Power Down (Soft-Off) PC to
power-on in the "Date (of Month) Alarm" and "Time
(hh:mm:ss) Alarm" fields. However, if the system is being
accessed by incoming calls or the network (Resume On
Ring/LAN) prior to the date and time set in these
fields, the system will give priority to the incoming calls
or network.
Disabled Disables the automatic power-on function. (default)
3.1.5.17 Date (of Month) Alarm
0 The system will power-on everyday according to the
time set in the "Time (hh:mm:ss) Alarm" field.
1-31 Select a date you would like the system to power-on.
The system will power-on on the set date, and time set
in the "Time (hh:mm:ss) Alarm" field.
3.1.5.18 Time (hh:mm:ss) Alarm
This is used to set the time you would like the system to power-on.
If you want the system to power-on everyday as set in the "Date
(of Month) Alarm" field, the time set in this field must be later than
the time of the RTC set in the Standard CMOS Features submenu.
3.1.5.19 Reload Global Timer Events
When enabled, access to the specified field (Primary IDE 0/1, FDD/
COM/LPT Port or PCI PIRQ[A-D]#) will cause the system to wake
up completely from the power management mode. When disabled,
the system will not wake up from the power management mode
despite access to the specified field.
3
BIOS Setup
8 7