DFI LanParty 925X-T2 User Manual page 92

3
BIOS Setup
3.1.7.6 PCB Board Tempr, VRM Power Tempr and CPU Chip Tempr
These fields will show the temperature monitored by the system.
3.1.7.7 CPU Fan Speed, Sys Fan3 Speed and Sys Fan2 Speed
These fields will show the fan speed of the cooling fans in RPM
(Revolutions Per Minute).
9 2
Note:
The onboard hardware monitor function is capable of detecting
"system health" conditions but if you want a warning message
to pop-up or a warning alarm to sound when an abnormal
condition occurs, you must install the Hardware Monitor utility.
This utility is included in the CD that came with the system
board. Refer to the Hardware Monitor section in chapter 4 for
more information.