DFI LanParty 925X-T2 User Manual page 77

On-Chip Serial ATA Setting
SATA Mode
IDE This option configures the Serial ATA drives in IDE mode.
RAID This option configures RAID on the Serial ATA drives.
On-Chip Serial ATA
Disabled
Auto
Combined Mode This option allows you to use both IDE and
Enhanced Mode This option allows you to use both IDE and
SATA Only
PATA IDE Mode
This field is used to select the function mode for the IDE 1
connector and its relation to the SATA ports.
Primary
Secondary
Disables the onboard SATA.
The system will detect the existing SATA and
IDE drives then automatically set them to the
available master/slave mode.
SATA drives; allowing a maximum of 4 drives -
1 IDE Master, 1 IDE Slave and 2 SATA. You
must manually set the SATA and PATA drives'
mode in the "PATA IDE Mode" and "SATA
Port" fields.
SATA drives; allowing a maximum of 6 drives -
1 IDE Master, 1 IDE Slave and 4 SATA.
This option automatically sets the SATA drives
to Primar y Master mode. Since the SATA
drives are in Master mode, you cannot set the
IDE drive to Master mode.
IDE 1 serves as Primary Master and Primary
Slave channel. SATA 2 and SATA 4 serve as
Secondary Master and Secondary Slave channel.
SATA 1 and SATA 3 are disabled.
IDE 1 ser ves as Secondar y Master and
Secondary Slave channel. SATA 1 and SATA 3
serve as Primary Master and Primary Slave
channel. SATA 2 and SATA 4 are disabled.
3
BIOS Setup
7 7