DFI LanParty 925X-T2 User Manual page 88

3
BIOS Setup
3.1.6 PnP/PCI Configurations
This section describes configuring the PCI bus system. It covers
some very technical items and it is strongly recommended that only
experienced users should make any changes to the default settings.
The settings on the screen are for reference only. Your version may not be identical
to this one.
3.1.6.1 Init Display First
This field is used to select whether to initialize the AGP or PCI first
when the system boots.
AGP
PCI Slot
3.1.6.2 Reset Configuration Data
Enabled The BIOS will reset the Extended System Configuration
Disabled The BIOS will not reset the configuration data.
8 8
When the system boots, it will first initialize the AGP.
When the system boots, it will first initialize PCI.
Data (ESCD) once automatically. It will then recreate a
new set of configuration data.