DFI LanParty 925X-T2 User Manual page 61

3.1.1.3 IDE Channel 0 Master and IDE Channel 0 Slave
Move the cursor to the "IDE Channel 0 Master" or "IDE Channel 0
Slave" field, then press <Enter>.
The settings on the screen are for reference only. Your version may not be identical
to this one.
IDE HDD Auto Detection
Detects the parameters of the drive. The parameters will automati-
cally be shown on the screen.
IDE Channel 0 Master and IDE Channel 0 Slave
The drive type information should be included in the documentation
from your hard disk vendor. If you select "Auto", the BIOS will auto-
detect the HDD & CD-ROM drive at the POST stage and show
the IDE for the HDD & CD-ROM drive. If a hard disk has not
been installed, select "None".
3
BIOS Setup
6 1