Backlight; Min Max Recording Mode - Fluke 902 User Manual

902
Users Manual

Backlight

C
Press to toggle the backlight on and off. The backlight
automatically turns off after 2 minutes.
To disable the automatic 2-minute backlight timeout, hold
C
down while turning the Meter on.

MIN MAX Recording Mode

The MIN MAX recording mode captures the minimum and
maximum input values. When a new high or low is
detected, the Meter beeps.
To use this feature:
1. Put the Meter into the desired measurement function
and range.
Press Jto enter MIN MAX Mode. MAX is displayed
2.
and the highest reading detected since entering MIN
MAX is displayed.
Press Jto step through the minimum (MIN) and
3.
present readings.
4. To pause MIN MAX recording without erasing stored
values, press I. K is displayed.
To resume MIN MAX recording, press I again.
5.
To exit and erase stored readings, press Jfor at
6.
least two seconds.
18