Locking And Unlocking User Controls - Barco Coronis 21-inch Installation & user manua Installation And User Manual

Display operation
To exit from a menu, rotate the control wheel to select EXIT and
3.
press the control wheel shortly.
If you exit from the Main Menu, you exit the OSD.
To change an adjustment value (e.g., the luminance value), rotate
4.
the control wheel to select the adjustment and press the wheel
shortly.
The adjustment name appears, as well as the current adjustment
value. Rotate the wheel to change the value.
When done, press the wheel shortly to confirm the change and
return to the menu.
To select a value from a predefined list (e.g., in Settings), rotate
5.
the control wheel to select the setting and press the control wheel
until the desired value appears.

Locking and unlocking user controls

The User Controls function allows to disable or enable the control wheel
functions.
When user controls are disabled, you cannot:
• display and use the on-screen display
• switch the display in stand-by mode
To disable user controls:
Rotate the control wheel to display the on-screen display. The
1.
Main Menu appears.
Rotate the control wheel to select Settings.
2.
Press the control wheel to enter the Settings menu.
3.
SETTINGS
DPMS
Power LED
User Controls
EXIT
Figure 26: Settings menu
On
On
On
75