Parts, controls and connectors
Rear
Connector compartment cover
1.
To get access to the connectors, remove the cover by pulling down
the 2 clips at the top of the cover.
Tilt & swivel foot cover
2.
This cover is packed in a separate box when the display is shipped
to the customer.
Tilt & swivel foot
3.
Slot for security cable (e.g., Kensington lock)
4.
DVI (digital) video input
5.
USB upstream port
6.
Connect this connector to the PC USB bus if you wish to connect
USB devices to the display's USB downstream port.
USB downstream port
7.
When the display is connected to the PC USB bus, you can connect
USB devices, such as keyboard, mouse, digital camera, to this
connector.
DC power input
8.
26
Figure 2: Rear side