Reset Electronics - Barco Projector Toolset Reference Manual

6. Configurator, General projector settings
2. Check the items which may also be reset during the reset operation (b).
The following items are normally exclude during a reset operation:
- IP settings
- Serial communication settings
- DMX settings
3. Click on the button Reset now next to Reset to factory defaults (c).
4. Click Close.
Image 6-23
Restore factory defaults
6.9.2

Reset electronics

How to reset
1. Click on Maintenance. (image 6-24)
The Maintenance dialog box is displayed.
2. Click on the button Reset now next to Reset electronics.
3. Click Close.
90 R5976924 PROJECTOR TOOLSET 16/04/2009