Calibrate Lens Zoom And Focus - Barco Projector Toolset Reference Manual

Image 6-18
Contrast enhancement
6.8.7

Calibrate lens zoom and focus

What can be done ?
With the calibration buttons, the lens is searching for its maximum and minimum zoom and focus. These
values are stored as the zoom and focus limits and will be used to determine the exact lens position when
a zoom or focus command is given.
How to calibrate
1. Click on Advanced (a). (image 6-19)
The Advanced control dialog box opens.
2. Click on Calibrate lens zoom to search for the minimum and maximum zoom values (b).
Note: This procedure can take a few minutes.
3. Click on Calibrate lens focus to search for the minimum and maximum focus values (c).
Note: This procedure can take a few minutes.
R5976924 PROJECTOR TOOLSET 16/04/2009
6. Configurator, General projector settings
85