Custom Color Space Set Up - Barco Projector Toolset Reference Manual

9. Configurator, Color alignment
custom preset). A temporary custom adjustment is possible. The maximum color space which can be
displayed is the projector color space. This color space is measured at the factory and stored inside the
projector.
How to select a color standard
1. Click on the open icon next to Active standard (a). (image 9-2)
A dialog box with a list of possible selections is displayed (b).
2. Select the desired standard color space (c).
Projec- Maximum color space
tor
EBU European Broadcasting Union. This organization defines a European standard.
American standard.
SMPTE
Custom The user can define the x and y coordinates for red, green and blue which forms the
corners of the color space. By changing the coordinates, the color reproduction can be
changed.
3. Click Open (d).
The selected standard is loaded.
If a fixed standard is selected, the coordinates are given as information but cannot be edited.
When custom is selected, the Target coordinates can be changed.
Image 9-2
Color space selection
9.3

Custom color space set up

Setup via coordinates
1. Select first Custom color space.
2. Click on the Target tab. (image 9-3)
The coordinates become available.
154 R5976924 PROJECTOR TOOLSET 16/04/2009