Serial Network Address; Dmx Settings; Dmx Address - Barco Projector Toolset Reference Manual

11. Configurator, Communication settings
Fourth example
• PC IP Address : 192.168.200.1
• PC Subnet Mask : 255.255.0.0
• Projector IP Address : 192.168.100.3
• Projector Subnet Mask: 255.255.0.0
Remark : Communication possible. PC address is in the subnet range of the projector's IP address. The
third group in the IP¨ addresses can be any value as the third group in the subnet mask is 0.

11.2 Serial network address

Do not change the serial network address when connected over a serial loop.
How to set up
1. Click on the up down controls of the spin box next to Serial network address until the desired address
is displayed
Or,
click in the input field of the spin box and enter the desired address with the keyboard. (image 11-3)
2. Click Apply.
The serial network address is set.
Image 11-3
Serial network settings

11.3 DMX settings

11.3.1

DMX address

About a DMX address
Before a device can be used a DMX address must be assigned to that device That address can be any
value between 0 and 512 and should be unique within an ArtNet universe.
170 R5976924 PROJECTOR TOOLSET 16/04/2009