Edit Input Settings - Barco Projector Toolset Reference Manual

8. Configurator, Projector adjustment settings
4. Click on the desired file in the list (e) and click Open or Select (f).
When a standard file is selected or a not matching custom file, Projector Toolset will ask to create a
new custom source file by copying the settings of the selected file into the custom file.
5. Click OK to create a new custom source file. If Cancel is pressed the previous selected file is loaded
again.
The new created file can be edited.
Image 8-12
Load file from all files
8.5.4

Edit Input settings

Adjustable items
• Total horizontal pixels: total horizontal pixels in the source. If the value is wrong, sampling mistakes
(small vertical bars in the projected image) will be seen in the image.
• Active horizontal pixels: determine the width of the window on the screen. This value is normally given
in the source specifications. If not, adjust until full image height is displayed (no missing lines).
• Horizontal start in pixels: number of pixels between the beginning of the input signal and the start of
the video information in the signal.
• Total vertical pixels: total vertical pixels in the source.
• Active vertical pixels: number of vertical pixels determining the height of the projected image. This
value is normally given in the specifications of the source. If not, adjust until full image height is dis-
played (no missing lines)
• Vertical start in pixels: number of pixels between the start of the input signal and start of the image on
the screen.
• Horizontal period in nanoseconds.
How to edit
1. Select first a window.
120 R5976924 PROJECTOR TOOLSET 16/04/2009