Diagnostics Module; Introduction; Actual Mode - Barco Projector Toolset Reference Manual

15. DIAGNOSTICS MODULE

Overview
•

Introduction

•

Actual mode

• History mode
15.1 Introduction
Overview
Diagnostics gives the possibility to get an overview of the working of the projector.
Voltages, fan speeds and temperatures are red out as well as an indication about the lamp run time, lamp
strikes and projector run time.
Start up
To start up the Diagnostics, click on the diagnostics icon (
Modules and select Diagnostics.
Image 15-1
Start Diagnostics module
Diagnostic modes
Two diagnostic modes are available:
• Actual: current situation is represented in the interface.
• History: a logging of previous warnings and errors.
To start up the desired mode, click on Diagnostics mode and select the desired mode, Actual or History.
Image 15-2
Diagnostics mode selection
15.2 Actual mode
Overview
• Run time, lamp run time and strikes
• Voltages
• Temperatures
• Fan speeds
R5976924 PROJECTOR TOOLSET 16/04/2009
15. Diagnostics module
) on the navigation button bar or click on
217