Table of Contents
Advertisement
Image 13-23
Indentation, cylindrical warping
A Positive indentation
B Negative indentation
How to adjust
1. Within the Cylindrical warping menu, click on the slider below Indentation and move the slider to the
left or the right until the desired indentation is obtained (1). (image 13-24)
Or,
click in the input field next to the Indentation slider and enter the desired value with the keyboard (2).
A recalculation is automatically executed.
Image 13-24
Indentation
When a node is selected, first deactivate this node and click on the Calculate warp but-
ton.
13.16 Gradient
About gradient
E.g. when using a hatch pattern, the gradient is the differentiation between two lines which varies from a
small difference to a larger difference.
R5976924 PROJECTOR TOOLSET 16/04/2009
13. Configurator, Warp User Interface
A
B
203
- Quick Links:
- Introduction
Hide quick links:
Advertisement
Table of Contents
