Introduction; Loading A Fitting Input File - Barco Projector Toolset Reference Manual

8. Configurator, Projector adjustment settings
• Input color temperature
8.5.1

Introduction

About files
Before a new source can be used, a correct file has to installed. The projector's memory contains a list of
files corresponding to the most used sources. When the source corresponds with one of these files, the
file can be loaded and saved for future use. When there is a little difference, the file can also be loaded
and then edited until the source specs are reached.
Types of source files
When opening the list of source files, you will recognize 2 types of source files:
• system source files (default available in the projector's memory)
• custom source files
The custom source files with the same name of the system source files are indicated with a index number
between brackets.
8.5.2 Loading a fitting input file
Load via Load icon
1. Select first a window.
2. Click on Select file icon (a). (image 8-10)
The Load (fit) dialog box opens (b).
Only the best fitting files are displayed. Files with a digit between brackets are custom source files. All
others are standard source files.
3. Select a file from the list (c).
4. Click Open or Select to load the selected file (d).
When a standard file is selected or a not exactly matching custom file, Projector Toolset will ask to
create a new custom file by copying the settings of the selected file into the custom file.
5. Click OK to continue.
The new created custom source file is loaded and can be edited if necessary
Image 8-10
Load fitting file via load icon
118 R5976924 PROJECTOR TOOLSET 16/04/2009