Deciding The Route; Setting The Destination - Alpine NVD-V001 SMART MAP PRO Owner's Manual

Setting the destination

When you have found the location you want to go
to, the route search is carried out automatically.
Find the destination on the map,
1
then press ENTER.
For details on how to find your
destination, see pages 16 – 27.
The point menu appears. Select
2
"DESTINATION" and press ENTER.
When the route search is started,
3
the message "Motorway
preference calculation (or Ordinary
road preference calculation)" will
be displayed.
To switch the preference mode (between
motorway and ordinary road), press the route
button while this message is being displayed.
The route search screen is displayed.
4
The route to your destination is searched
for automatically in either motorway
preference or ordinary road preference
mode. The search start message shows
which mode the system is searching in,
so if you want to change the mode, press
Tips
the ROUTE button while the search
screen is being displayed. Each time you
press the ROUTE button, the mode
toggles between motorway preference
and ordinary road preference.

Deciding The Route

When the search is complete, the
5
required time and distance to the
destination are displayed.
The contents of the screen
depend on how it has been
Tips customized with Guidance
Condition Settings (page 44).
The searched for route is
6
displayed. When you start driving
this route, the guidance begins.
a Pressing the
toggles between the Basic
Guidance display and
Detailed Map display.
a After arriving to the destina-
Tips
tion, always delete the
destination (as explained on
page 39). If the destination is
left set, the guidance
continues to be repeated.
When the destination is
deleted, the waypoints will
be also deleted.
CAUTION
COMPLY WITH THE CURRENT
TRAFFIC REGULATIONS WHILE
DRIVING
When using the navigation system,
always comply with the local traffic
regulations on the road while driving.
Searched
for route
button
35