Setting Waypoints - Alpine NVD-V001 SMART MAP PRO Owner's Manual

Deciding The Route

Setting waypoints

You can set up to 5 waypoints from your current
location to the destination. Set these points after
the route searching from your current location to
your destination has been completed.
Find the desired waypoint on the
1
map, then press ENTER.
The point menu appears. Select
2
"WAYPOINT" and press ENTER.
• To set multiple waypoints repeat
Steps 1 and 2.
• These points should be set as
WAYPOINT 1, WAYPOINT 2,
WAYPOINT 3 and so on in order
in which they are passed. Up to 5
points (max.) can be set.
Set the final waypoint and press
3
ENTER. Then press the POS. button.
The route search screen is displayed.
36
When the route search is
4
complete, the current location is
displayed. When you start driving
this route, the guidance begins.
a Waypoints are indicated with
,
is indicated with
a When you delete the
destination, the waypoints
are also deleted.
Tips
a To cancel any waypoints,
always delete them. If you
leave in waypoints, the
navigation system continues
to guide you to them.
The entire route is blue.
Present car
position
Waypoint3
Destination
CAUTION
COMPLY WITH THE CURRENT
TRAFFIC REGULATIONS WHILE
DRIVING
When using the navigation system,
always comply with the local traffic
regulations on the road while driving.
... and the destination
.
Waypoint1
Waypoint2