Before Using The System; Rewriting Operating System - Alpine NVD-V001 SMART MAP PRO Owner's Manual

Before Using The System

Before Using The System
Rewriting operating
system programme
If a different version of the map disc has been
used with your navigation system, the operating
system programme installed will be rewritten
automatically to read this SMART MAP PRO disc.
Remove the different version of
1
the map disc from your navigation
system. Insert this SMART MAP
PRO disc. (For removing and
inserting procedure, refer to the
Owner's Manual of the system.)
The display shows "Set Original CD-
ROM" while the disc is being loaded,
then it shows "Program DVD-ROM is
being loaded." and the system rewrites
the operating system programme.
Progress of rewriting
10
If the language has not been
2
selected yet (when the system is
used for the first time), the guide
language selection menu is
displayed. Select (highlight) the
desired guide language by tilting
the joystick. Then press the
ENTER button. (For details, see the
"Setting language mode" section.)
Note: For the locations and functions of the
remote control's buttons, see pages 50
and 51.
The opening screen appears in the
3
display.
For the procedure after this, see "Before
Using The System" on page 12.
Note: If a different version of the map disc is
inserted after the system programme
has been rewritten, the selection menu
appears in the display.
Select the desired menu item by tilting
the joystick on the remote control and
pressing the ENTER button on the
joystick. The opening screen appears
on the display.