Table of Contents
Advertisement
Searching for point of
interest from
telephone number
(Expert mode)
If you have stored the telephone number of the
point of interest (P.O.I.) in memory, you can
easily display that point of interest on the map
as your destination by just inputting the tel-
ephone number.
To store special points into memory, see
"Storing locations into memory" on page 30. To
add telephone numbers to the memory points,
see "Memory point editing-Telephone Number
Editing" on pages 31 and 33.
Press the MENU button to display
1
the main menu.
Select "Search" from the main
menu, the "Locate telephone No.
on map" menu appears in the
display automatically.
Select "TELEPHONE No." and
2
press ENTER. The numeric pallet
is displayed.
If no telephone number has been
stored yet, the display shows "Tel-
Tips
ephone No. is not available."
Enter the telephone number of the
3
point following Steps 3 to 4 of the
"Searching for destination from
telephone number" section (page
21).
When the desired telephone
4
number has been input, select
"OK" and press ENTER.
The details of the point of interest
5
appears in the display. If the de-
tails are correct, select "MAP
DISPLAY" and press ENTER.
The "Point may be set on map"
6
menu with the map showing the
area of the point of interest
appears. Select the desired menu
item and press ENTER to set the
point as a destination, waypoint,
etc.
25
Advertisement
Table of Contents
