Memory Channel Scanning Setting; Group Scanning Step - Alinco DR-B185HT Manual

7
PARAMETER SETTING MODE
2. Rotate the push-button rotary knob or press the [UP]/[DOWN] keys
on the microphone to change the setting.
The options are as follows.
ON:
▼
Checks every 5 seconds whether the priority channel receives a
signal or not.
OFF:
▼
Does not check whether the priority channel receives a signal or
not.
If there is no priority channel, ON cannot be selected.
3. Press the push-button rotary knob.
The unit will go back to menu mode.
29
„ „

MEMORY CHANNEL SCANNING SETTING

Set whether to skip programmed channels or scan only programmed
channels when scanning memory channels.
1. Rotate the push-button rotary knob or press the [UP]/[DOWN] keys
on the microphone to display the menu number "30".
The current setting will appear on the display.
The default setting is [SCHSKIP].
2. Rotate the push-button rotary knob or press the [UP]/[DOWN] keys
on the microphone to change the setting.
The options are as follows.
SKIP: Scans skipping programmed memory channels.
▼
ONLY: Scans only programmed memory channels.
▼
3. Press the push-button rotary knob.
The unit will go back to menu mode.
„ „

GROUP SCANNING STEP

Set the channel step for group scanning.
1. Rotate the push-button rotary knob or press the [UP]/[DOWN] keys
on the microphone to display the menu number "31".
The current setting will appear on the display.
The default setting is [GSTP.20].
2. Rotate the push-button rotary knob or press the [UP]/[DOWN] keys
on the microphone to change the setting.
The options are as follows.
10, 20, 30, 40, 50
▼
3. Press the push-button rotary knob.
The unit will go back to menu mode.