Lexmark Apps Administrator's Manual page 8

4
Select License Server.
5
Stop, and then restart the License Server service.
Configuring the network license
1
From the Embedded Web Server, click Settings or Configuration.
2
Click Device Solutions > Solutions (eSF), or click Embedded Solutions.
3
Click Network License.
4
Enter the IP address or host name and optional port for the network license server where the license is stored. You
can enter values for up to three separate servers.
5
In the Heartbeat Period field, enter a value of 2–60 minutes to designate how often the printer will ping the network
license server to check for updates and maintain access to an electronic license.
6
In the Number of Retries field, enter a number of 1–5 to set the maximum number of times the printer can attempt
to obtain a license before quitting.
7
Click Apply.
Updating the network license
Using the Embedded Web Server
1
Click Solutions.
2
Under Installed Solutions, click the appropriate application link.
3
Click License > Update License.
4
Select Network.
5
Click Update License.
Using MarkVision Professional
1
In MarkVision Professional, select the device where the application is installed.
2
Click Settings > Embedded Solutions > Solutions Management.
3
Under the appropriate application, click Update License.
4
In the Update License window, select Use a network license server.
5
Click Update License.
Configuring the application
8