System Status Leds - HP ML350T06 - E5520 Sff Us Svr Setup And Installation Manual

System Status LEDs

The system status LEDs and the Power On/Standby button are located on the front of
the server.
The Power On/Standby button allows you to:
·
Power up the server.
·
Place the server in standby mode.
·
Power down the server.
Figure E-1 and Table E-1 explains each possible LED status.
Figure E-1: System status LEDs
HP ProLiant ML350 Generation 3 Server Setup and Installation Guide
1 2 3
4 5
LED Indicators, Switches, and Jumpers
E-3