HP ML350T06 - E5520 Sff Us Svr Setup And Installation Manual page 194

Index
redundant power supply bay,
identifying 3-50
redundant power supply,
installation 3-50
redundant ROM
accessing 5-8
benefits 5-8
defined 5-8
switch settings E-13
registration, server 2-34
Regulatory Compliance Identification
Numbers A-1
remote boot, PXE 1-14, 5-4
remote server features 5-11
removable media bay, installing device
into 3-15
removable media device blanks
removing 3-9
replacing 3-9
removable media drives, number
supported 1-4
removing
access panel (rack) 3-7
access panel (tower) 3-6
bezel 3-4
DIMMs 3-33
expansion board retainer,
illustrated 3-23
memory modules 3-33
PPM (Processor Power Module) 3-46
removable media device blanks 3-9
tape drive 3-20
replacing
access panel (tower) 3-6
bezel 3-5
lithium battery 3-47
removable media device blanks 3-9
system board battery 3-47
resources See also documentation
CarePaq D-14
HP ProLiant ML350 Generation 3
Server Maintenance and Service
Guide D-14
Index-8
Servers Troubleshooting Guide D-14
ROM
flashing 5-9
System Firmware Update 5-13
updating 3-34
upgrading 5-13
ROM Based Setup Utility See RBSU
ROM Selection, RBSU option 5-7
ROMPaq
diskette, creating 5-10
overview 5-9
server features 1-16
round-hole racks, server installation 2-20
S
safety standards
IEC 825 A-9
laser compliance A-9
sales website 2-9
screws 2-7
SCSI
ID, setting E-13
jumper settings E-13
SCSI adapter wide-to-narrow,
SCSI adapter, installing 4-6
SCSI cable, illustrated 4-3
SCSI cables location, illustrated 4-8
SCSI device cabling, illustrated 4-7
SCSI device guidelines 4-2
SCSI devices
additional information 4-4
connecting SCSI controller to removable
connector, identified 4-10
Fast SCSI-2, installing 4-6
SCSI hard drives, installation
HP ProLiant ML350 Generation 3 Server Setup and Installation Guide
illustrated 4-6
media or other device 4-7
guidelines 3-12