Powering Down The Server - HP ML350T06 - E5520 Sff Us Svr Setup And Installation Manual

Powering Down the Server

To power down the server:
CAUTION: Failure to follow these directions could result in damage to equipment or
loss of information.
1. Back up the server data and record configuration information.
2. Shut down the operating system as directed in your operating system instructions.
3. Power down the server by pressing the power button on the front of the server.
4. Remove the power cord.
WARNING: To reduce the risk of injury from electric shock or damage to the
equipment when installing an upgrade, be sure that the server is powered
down. Remove all AC power cords to completely disconnect power from the
system. The front panel power button may not completely shut down power to
the server.
5. Disconnect any external equipment connections from the server.
HP ProLiant ML350 Generation 3 Server Setup and Installation Guide
Hardware Options Installation
3-3