Accessing The Redundant Power Supply Bay; Powering Up The Server - HP ML350T06 - E5520 Sff Us Svr Setup And Installation Manual

Overview of Server Installation

Accessing the Redundant Power Supply Bay

The cable management arm comes with a center joint to allow easy access to the
power supply bays without having to remove the arm.
To service the power supply bays:
1. Lift up the center joint locking bracket located near the center of the outside
cable management arm piece (1).
2. Swing the cable management arm back away from the server chassis (2).
2
Figure 2-19: Swinging the Cable Management Arm away
from the chassis
3. After completing the desired service function, return the cable management arm
to its locked position by reversing steps 1 and 2.

Powering Up the Server

Power up the server after the peripheral and power cords are connected to the server.
2-28
1
HP ProLiant ML350 Generation 3 Server Setup and Installation Guide