Rack Installation Procedures; Installing Rack-Mountable-Specific Server Chassis Components - HP ML350T06 - E5520 Sff Us Svr Setup And Installation Manual

Overview of Server Installation

Rack Installation Procedures

Install any optional hardware components before installing and powering up the
server for the first time. Refer to Chapter 3, "Hardware Options Installation," for
instructions on installing PCI expansion boards, memory, processors, hot-plug
expansion boards, and other major hardware options.
The rack installation sequence for this server includes:
·

Installing rack-mountable-specific server chassis components

·
Securing the mounting hardware to the rack
·
Installing the server into the rack
·
Installing the cable management arm
·
Cabling the server
·
Powering up the server
·
Installing an operating system
·
Configuring the server
·
Registering the server
Installing Rack-Mountable-Specific Server Chassis
Components
You must configure the server per the following before installing in the rack:
·
System Configuration Switch setting (factory pre-set for rack model servers)
·
Component rails
·
Cable management arm bracket
2-12 HP ProLiant ML350 Generation 3 Server Setup and Installation Guide