Installing The Cable Management Arm Bracket - HP ML350T06 - E5520 Sff Us Svr Setup And Installation Manual

Overview of Server Installation

Installing the Cable Management Arm Bracket

The cable management arm bracket allows you to secure the cable management arm
to the server and to the rear frame of the rack.
To install the cable management arm bracket to the server:
1. Locate the two bracket screws included with your kit.
2. Using a Torx T-15 screwdriver and the two bracket screws, secure the cable
management arm bracket to the back of the server.
Figure 2-6: Securing the cable management arm bracket
to the server
2-16 HP ProLiant ML350 Generation 3 Server Setup and Installation Guide