Table of Contents
Advertisement
Destination Port
Inbound/Outbound
To block access, to/from a single IP address, enter that IP address as
the
"255.255.255.255".
Click Add button to apply your changes.
Add Raw IP Filter
Go to "Type" drop-down menu, select "Use Protocol Number".
Field
Rule name
from range 0 ~ 65535. It is recommended that this option be
configured by an advanced user.
This is the Port or Port Ranges that defines the application
Select Allow or Block the access to the Internet ("Outbound")
or from the Internet ("Inbound").
Host
IP
Address
Users-define description to identify this entry or choosing
"Select" drop-down menu to select existing predefined rules.
and
use
a
Description
89
Host
Subnet
Mask
of
Advertisement
Table of Contents
