Table of Contents
Advertisement
address of the router. Users should make their own decisions on how to best protect
their network.
Please follow the steps below for your PC's network environment installation. First of
all, please check your PC's network components. The TCP/IP protocol stack and
Ethernet network adapter must be installed. If not, please refer to your Windows-
related or other operating system manuals.
Any TCP/IP capable workstation can be used to communicate with or
through the WebShare Router. To configure other types of
workstations, please consult the manufacturer's documentation.
Configuring PC (Windows 2000)
1.
Go to Start -> Settings -> Control Panel. In the Control Panel, double-
click on Network and Dial-up Connections.
2.
Double-click LAN Area Connection.
3.
In the LAN Area Connection Status window, click Properties.
4.
Select Internet Protocol (TCP/IP) and click Properties.
5.
Select the Obtain an IP address automatically and the Obtain DNS
server address automatically radio buttons.
6.
Click OK to finish the configuration.
Configuring PC (Windows XP)
1.
Go to Start -> Control Panel (in Classic View). In the Control Panel,
double-click on Network Connections.
2.
Double-click Local Area Connection.
3.
In the LAN Area Connection Status window, click Properties.
4.
Select Internet Protocol (TCP/IP) and click Properties.
5.
Select the Obtain an IP address automatically and the Obtain DNS
server address automatically radio buttons.
6.
Click OK to finish the configuration
22
Advertisement
Table of Contents
