Page 2
Italiano fare riferimento al sito www.atlantis-land.com. ENGLISH This product is covered by Atlantis Land 3 years Fast Swap warranty. For more detailed informations please refer to the web site www.atlantis-land.com. For more detailed instructions on configuring and using this device, please refer to the online manual.
Page 3
WARRANTY. The Atlantis Land logo is a registered trademark of Atlantis Land SpA. All other names mentioned mat be trademarks or registered trademarks of their respective owners. Subject to change without notice.
The indicators blink green while the WAN port was transmitting or receiving data on the xDSL/Cable modem. This indicator lights green when there are wireless devices connected and WLAN transmitting Router. These indicators light green when the LAN ports were connected successfully. These indicators blink green while the LAN ports were transmitting data.
LAN(3) Reverse SMA(4) Reset(5) 1.4 Cabling Plug in one end of the network cable to the WAN port of the Wireless Internet Broadband Router. Plug in the other end of the network cable to the Ethernet port of the xDSL or Cable modem (E.G A02-RA141 or A02- RA111).
Internet Broadband Router functions both as a connection- sharing unit and as a switch. The control LEDs of the Wireless Internet Broadband Router are clearly visible and the status of the network link can be seen instantly: 1. With the power source on, once the device is connected to the broadband modem, the Power, LAN, WLAN and WAN port link LEDs of the Internet Broadband Router will light up indicating a normal status.
OS, Windows 95/98/NT/2000/Me, etc. The product provides a very easy and user-friendly interface for configuration. Before Configuration This section describes the configuration required by LAN- attached that Broadband Router, either to configure the device, or for network access. These PCs must have an Ethernet interface installed properly, be connected to the Wireless Broadband Router either directly or through an external Switch, and have TCP/IP installed and configured to obtain an IP...
1.6 IE Configuration Now open IE, go to Instruments menu, select the Connections tab and select one of the following options: • Never use remote connection • remote connection isn’t available 1.7 TCP/IP Configuration Configuring PC (Windows 95/98/ME) Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Configuration tab.
Configuring PC (Windows NT4.0) Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Protocols tab. Select TCP/IP Protocol and click Properties. Select the Obtain an IP address from a DHCP server radio button and click OK. Configuring PC (Windows 2000) Go to Start / Settings / Control Panel.
Page 12
Wireless Broadband Router In the LAN Area Connection Status window, click Properties.
Page 13
Select Internet Properties. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. Click OK to finish the configuration Wireless Broadband Router Protocol (TCP/IP) click...
1.8 Browser configuration Open the web browser, enter the local port IP address of this Wireless Broadband Router, which default at 192.168.1.1, and click “Go” to get the login page. The default username is admin, password admin and click “OK” to continue.Click on the desired item to expand the page with all settings in the main navigation panel.
Page 15
Wireless Broadband Router Step 1: Set Password You can change the password as you like and then click “Next” to continue. Step2: Chose Time Zone Select your time zone from the drop down list. Please click “Next” to continue.
Page 16
Wireless Broadband Router Step 3: Set LAN & DHCP Server Set your IP address and mask. The default IP is 192.168.1.1. If you like to enable DHCP, please click “Enabled”. DHCP enabled is able to automatically assign IP addresses. Please assign the range of IP addresses in the fields of “Range start”...
Page 17
Wireless Broadband Router Step 4: Select Internet Connection Type Select how the router will set up the Internet connection: Obtained IP automatically; Fixed IP address; PPPoE to obtain IP automatically; PPPoE with a fixed IP address; PPTP.
Page 18
Wireless Broadband Router Obtain IP automatically (DHCP client): If you have enabled DHCP server, choose "Obtain IP automatically (DHCP client)" to have the router assign IP addresses automatically. Fixed IP Address: If Fixed IP address is assigned, the below screen will pop up.
Page 19
Wireless Broadband Router PPTP: Enter IP adresses and password.
Page 20
Wireless Broadband Router Step 5: Set Wireless LAN connection Click “enable” to enable wireless LAN. If you enable the wireless LAN, type the SSID in the text box and select a communications channel. The SSID and channel must be the same as wireless devices attempting communication to the router.
Page 21
Wireless Broadband Router Then relaunch your Web browser, to link to your favorite Web site to test your Internet connection. For additional settings or information, refer to the Manual located on the CD.
Page 22
Atlantis Land S.p.A. Viale De Gasperi, 122 Mazzo di Rho – MI – Italy info@atlantis-land.com sales@atlantis-land.com...