Atlantis Land Web Share 3G 244WN User Manual page 48

ESSID
ESSID Broadcast
Regulation Domain There are seven Regulation Domains for you to choose from,
Channel Widht
Channel ID
TX Power Level
Connected
AP Mac Address
AP Firmware
Version
WMM
The ESSID is the unique name of a wireless access point (AP)
to be distinguished from another. For security purpose, change
the default WebShare244WN to a unique ID name to the AP
which is already built-in to the router's wireless interface. It is
case sensitive and must not excess 32 characters. Make sure
your wireless clients have exactly the ESSID as the device, in
order to get connected to your network.
It is function in which transmits its ESSID to the air so that
when wireless client searches for a network, router can then be
discovered and recognized. Default setting is Enabled.
•
Disable: If you do not want broadcast your ESSID.
Any client uses "any" wireless setting cannot
discover the Access Point (AP) of your router.
•
Enable: Any client that using the "any" setting can
discover the Access Point (AP) in the wireless
network.
including North America (N.America), Europe, France, etc. The
Channel ID will be different based on this setting
Select either 20 MHz or 20/40 MHz for the channel
bandwidth. The
performance will be.
Select the wireless connection ID channel that you would like to
use.
It is a function that enhances the wireless transmitting signal
strength. User may adjust this power level from minimum 1 up
to maximum 100
Representing in true or false. That it is the connection status
between the system and the build-in wireless card.
It is a unique hardware address of the Access Point
The Access Point firmware version.
Enable or disable the WMM support.
higher the bandwidth
48
the better the