Table of Contents
Advertisement
Field
NAT Type
Global IP Address
Select the Apply button to apply your changes.
Check
Field
Application
Protocol
Select desired NAT type. As set in default setting, it disables
the One-to-One NAT function.
•
Subnet: The subnet of the public/WAN IP address
given by your ISP. If your ISP has provided this
information, you may insert it here. Otherwise, use
IP Range method.
•
IP Range: The IP address range of your
public/WAN
192.168.1.1, end IP: 192.168.1.10
to create a new One-to-One NAT rule:
Users-defined description to identify this entry or click
drop-down menu to select existing predefined rules.
It is the supported protocol for the virtual server. In addition to
specifying the port number to be used, you will also need to
Description
IP
addresses.
Description
107
For
example,
IP:
Advertisement
Table of Contents
