Table of Contents
Advertisement
It is a wireless access point mode that enables wireless link and communication with
other access point. It is easy to be installed simply to define peer's MAC address of
the connected AP. WDS takes advantages of cost saving and flexibility which no extra
wireless client device is required to bridge between two access points and extending
an existing wired or wireless infrastructure network to create a larger network. It can
connect up to 4 wireless APs for extending cover range at the same time.
In addition, WDS enhances its link connection security in WEP mode, WEP key
encryption must be the same for both access points.
Field
WDS Service
Peer WDS MAC
Address (1-4)
WDS – Wireless Distribution System
The default setting is Disabled. Check Enable radio button to
activate this function.
It is the associated AP's MAC Address. It is important that your
peer's AP must include your MAC address in order to
acknowledge and communicate with each other.
Description
49
Advertisement
Table of Contents
